French Curved Iron Rod - Black (Build Your Own)
- Five diameter options
- Four standard finish options (see additional finishes in "Build Your Own")
- Top quality iron rod made to order. Choose standard sizes or go custom for no additional cost.
- Rod curves back towards wall on either end for a stylish finish.
- Creates a beautiful high quality finished look to your windows
- Sold by the foot.
Please select your desired rod length. If a length between the foot measurements is needed, please select the foot length one category longer than the specific length you need and list the exact length in the provided text box.
Rod Lengths are from the outside of the left wall flange to the outside of the right flange and DO NOT include the curved portion that returns to the wall. When ordering, please consider this when choosing your length.
All rods include a 3.5" projection. For a custom projection, please contact us for a custom order.
*A round flange note: the flange will extend a 1/2" past the rod on both the left and right side. This means that the actual rod (from curve to curve) will be the ordered rod length minus 1".
We do recommend extending your rod past your window to accommodate the stacking back of your draperies. The minimum we recommend is 3" past your window trim.
3/4" dia - spans up to 55" without a support bracket
1" dia - spans up to 60" without a support bracket
1 1/4" dia - spans up to 75" without a support bracket
1 1/2" dia - spans up to 90" without a support bracket
2" dia - spans up to 110" without a support bracket.
These spans indicate how long the rod can be before it needs a support bracket.
*Please note that although the spans may reach very wide, shipping restrictions require the rod to be under 95" to ship in one piece. All rods ordered longer than 95" will come with a interior fitting splice and a center support bracket with horizontal plate.
If your rod length is longer than 94", your rod will come in two equal pieces due to shipping restrictions. Because of this, you will also need to add the following items to your order:
(1) Horizontal Plate Support Bracket
Because our hardware is made by hand per order it does require approximately 5 weeks to ship from the date of order.
All hardware ships FedEx Ground with free shipping.
For lead time information, please see the section above.