Straight Iron Rod / Light Brown (Set)
- Straight Rod Drapery Hardware Set.
- All items needed for your length are included in this set.
- Top quality iron rod made to order in the USA.
- Four standard finish options (see additional options in "Sets")
WHAT'S INCLUDED IN A SET
We've taken the guess work out of your drapery hardware by included all items needed for your hardware based on the length chosen.
Included with each set:
(2) Button End Cap Finials
(2) Standard Brackets
Included if needed based on length:
(1) Support Bracket
(1) Interior Fitting Splice
Please note that center supports will be included in your rod using the general diagram below. Support bracket will match finish of rod (photo shown is only as an example):
3/4" Dia - Any length 4' and above.
1" Dia - Any length above 5'.
1 3/4" Dia - Any length above 6'.
1.5" Dia - Any length above 7'.
If your rod is longer than 94", your rod will come in two equal pieces due to shipping restrictions. The rods will fit back together with an interior fitting splice and will rest in the center support bracket for a seamless continous rod look.
If you'd prefer one continuous rod, please reach out for pricing on freight costs.
*Please note that rings are not included.
ADDITIONAL ITEMS YOU WILL NEED TO COMPLETE YOUR HARDWARE:
*Rings are not included in your set and must be added to your cart separately.
Please click here for our iron rings.
Below is a general diagram of how many rings are needed based on our draperies:
Ring Requirements for Knife Pleat:
single - 8 rings
1.5 width - 12 rings
double width- 16 rings
2.5 width - 20 rings
Ring Requirements for Pinch/Euro Pleat:
Single - 5 rings
1.5 Widths - 7 rings
Double Width - 10 rings
2.5 Widths - 12 rings
If your draperies include decorative trim, one additional rings must be added per panel.
DETERMING THE BEST ROD LENGTH
Please select your desired rod length. If a length between the foot measurements is needed, please select the foot length one category longer than the specific length you need and list the exact length in the provided text box.
All rods include a 3.5" projection. For a custom projection, please contact us for a custom order.
We do recommend extending your rod past your window to accommodate the stacking back of your draperies. The absolute minimum we recommend is 3" past your window trim keeping in mind that your draperies need space to stack off your window/door space when not in use.
IF YOU CHOSE A LENGTH LONGER THAN 94", IMPORTANT NOTE**
If your rod length is longer than 94", your rod will come in two equal pieces due to shipping restrictions. Because of this, you will also need to add the following items to your order:
(1) Horizontal Plate Support Bracket
3/4" dia - spans up to 55" without a support bracket
1" dia - spans up to 60" without a support bracket
1 1/4" dia - spans up to 75" without a support bracket
1 1/2" dia - spans up to 90" without a support bracket
2" dia - spans up to 110" without a support bracket.
All needed support brackets are included based on your rod length.
These spans indicate how long the rod can be before it needs a support bracket.
*Please note that although the spans may reach very wide, shipping restrictions require the rod to be under 95" to ship in one piece. All rods ordered longer than 95" will come with a interior fitting splice and a center support bracket with horizontal plate.
LEAD TIME / PRODUCTION TIME
Because our hardware is made by hand per order it does require approximately 5 weeks to ship from the date of order.
All hardware ships FedEx Ground with free shipping.
For lead time information, please see the section above.